Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

Register Log in
  • Congratulations TugboatEng on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

Flexy, Were you able to find the

Status
Not open for further replies.
jonolio

jonolio

Nuclear
Joined
Sep 28, 2022
Messages
1
Location
US
Flexy,

Were you able to find the information you needed on the ASME III Sight glass from thread794-428424? I have a similar issue and would like to know how you resolved yours. Thanks -Jonolio
 
Status
Not open for further replies.

Similar threads

Gears6580
  • Locked
  • Question Question
Code calculations to determine the thickness of the flat plate to blank leaking tubes
Replies
3
Views
634
r6155
r6155
S
  • Locked
Biostat B (Sartorius) - How to decontaminate the inner cooling system for repair, if the pumps are broken?
Replies
1
Views
1K
hacksaw
hacksaw
Fran67
  • Question Question
EN1591-3:2007 : Error in the standard?
Replies
1
Views
2K
NovaStark
NovaStark
I
  • Locked
  • Question Question
According to ASME Section II Part D, the size limit for SA-193 B7M is 100mm in SI units and 2.5 inches in US units. Are there any other reasons?
Replies
4
Views
2K
XL83NL
XL83NL
FPPE
  • Locked
  • Question Question
PV Elite Report - Tubes of the bundle
Replies
5
Views
4K
CuMo
CuMo

Part and Inventory Search

Sponsor

Back
Top