Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

Register Log in
  • Congratulations cowski on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

Flatness & Plating of octagonal ring gasket ASME B16.20

Status
Not open for further replies.
AshaPatel

AshaPatel

Mechanical
Joined
Mar 14, 2016
Messages
11
Location
KR
from where to check the flatness & Plating of octagonal ring gasket. If the gasket is as per ASME B16.20. Not find in the B16.20.
 
Sort by date Sort by votes
Flatness should be a customer or process requirement and the plating can be evaluated with a no or destructive technique analysis.
 
Upvote 0 Downvote
Status
Not open for further replies.

Similar threads

T
  • Locked
  • Question Question
Calculate required amount of paint for mechanical spring
Replies
5
Views
3K
Compositepro
Compositepro
ipi
  • Locked
  • Question Question
Uninsulated portions of insulated piping
Replies
1
Views
940
Andrew ONeill
Andrew ONeill
NGiLuzzu
  • Locked
  • Question Question
Painting procedures & reports generation SOFTWARE TOOL
Replies
2
Views
863
NGiLuzzu
NGiLuzzu
Rdpere
  • Locked
  • Question Question
What kind of coatings are there for the copper products?
Replies
8
Views
743
Rdpere
Rdpere
Bob_3
  • Locked
  • Question Question
Costs of Painting versus Grit blasting
Replies
1
Views
340
BenMacier
BenMacier

Part and Inventory Search

Sponsor

Back
Top