Equation A.6 located in ISO 19001-3 section A.8.4 looks incorrect. If L=8 m then the D>(8^2*7000)^(1/3)=76.5 m. That it is patently rediculous. Does anyone no where this equation comes from, or preferably, what the correct equation should be. It seems as if the diameter should be in mm or there should be a decimal place in the 7000 value, but I haven't been able to find any references.
Tek-Tips is the largest IT community on the Internet today!
Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!
-
Congratulations MintJulep on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!
Flare Towers and Booms (ISO 19901-3 A.8.4)
- Thread starter GMcDonald
- Start date
Similar threads
- Locked
- Question
- Locked
- Question
- Locked
- Question