TxKnight93
Mechanical
Can someone just use a flanged carbon steel pipe for industrial ducting, is this acceptable in HVAC industry standards?
Tek-Tips is the largest IT community on the Internet today!
Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!
-
Congratulations MintJulep on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!
Flanged Carbon Steel Pipe for Ducting
- Thread starter TxKnight93
- Start date
- Status
It's a curious question to ask in the Caesar II forum .....
IMHO, carbon steel would be a poor choice for HVAC since there is likely to be internal corrosion due to moisture content if nothing else.
Nothing wrong with flanged pipe (perhaps a bit over the top in terms of strength), but I'd recommend thin stainless or aluminium.
IMHO, carbon steel would be a poor choice for HVAC since there is likely to be internal corrosion due to moisture content if nothing else.
Nothing wrong with flanged pipe (perhaps a bit over the top in terms of strength), but I'd recommend thin stainless or aluminium.
- Status
Similar threads
- Locked
- Question