Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

Register Log in
  • Congratulations TugboatEng on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

Firesafe Design API 6FA or BS 6755 Part 2

Status
Not open for further replies.
stanier

stanier

Mechanical
Joined
May 20, 2001
Messages
2,442
Location
AU
Please advise whatare any differences for a fire safe design to API 6FA and BS6755 Part 2.

Geoffrey D Stone FIMechE C.Eng;FIEust CP Eng
 
Sort by date Sort by votes
Stanier,
maybe you'll find some interesting information reading the posts and FAQs listed in thread408-97580...

Hope this helps, 'NGL

 
Upvote 0 Downvote
Status
Not open for further replies.

Similar threads

Bazinga
  • Question Question
API 6D - Specified Level for Hydrogen (SLH)
Replies
2
Views
4K
Bazinga
Bazinga
I
  • Question Question
Classification of Swing Check Valve Opening Type per API 6D Clause 4.4
Replies
5
Views
16K
ilkerdburhan
I
trentar
  • Question Question
example of 12516 valve design calculations
Replies
0
Views
8K
trentar
trentar
S
  • Locked
  • Question Question
API 6A standard 10000psi ball valve material selection
Replies
4
Views
2K
Sean_Wei
S
Krausen
  • Locked
  • Question Question
API Valve Trim Type & NACE reqs (Gates, Globes, Checks)
Replies
1
Views
2K
Danlap
Danlap

Part and Inventory Search

Sponsor

Back
Top