Continue to Site

Eng-Tips is the largest engineering community on the Internet

Intelligent Work Forums for Engineering Professionals

Congratulations waross on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

FIRED HEATER MODIFICATION IN A REFINERY

Thread starter ROMEUM2
Start date May 30, 2012

Status: Not open for further replies.

May 30, 2012

ROMEUM2

Mechanical

Hi all,

I have to include a fired in a fired heater bottom. For this, i have to do several modifications in the bottom. One is to cut and modify the bottom beams, because the new burner will be installed in the middle of the fired heater.

someone has experience about this???

Thanks,