Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

  • Congratulations MintJulep on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

Fire Water Jockey Pump Electrical Supply 1

Status
Not open for further replies.

RUSure

Industrial
Joined
May 8, 2007
Messages
1
Location
US
My project involves upgrading an existing industrial fire water system. I am adding a diesel powered pump and two electric jockey pumps ( all with controllers ) to a system which has an existing primary electic pump and two backup diesel pumps.

Are the electrical wiring code requirements for the fire water jockey pumps/controllers exactly the same as those for a main electric fire water supply pump/controller? i.e. Power source, wiring, controller placement?

 
NFPA 20, section 9.1.1 states that the requirements are for fire pumps. A jockey pump is a pressure maintenance pump and is regulated by the requirements in NFPA 20, Chapter 5. Therefore it is not subject to the requirements in Chapter 9.
 
Status
Not open for further replies.

Part and Inventory Search

Sponsor

Back
Top