Continue to Site

Eng-Tips is the largest engineering community on the Internet

Intelligent Work Forums for Engineering Professionals

  • Congratulations cowski on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

Fine pitch spur gears.

Status
Not open for further replies.

DocSergey

Mechanical
Jan 30, 2015
4
Can anyone tell me which standard for fine pitched gears are still active and commonly used please?

DIN 58400/ 58405/ 58412 are withdrawn, there is no ISO standard for gears with module below 1 mm
(iso 1328-2 defines total radial composite tolerance for module from 0,2 up to 10, but runout is only from 0,5 and higher),
have no access to british standard and AGMA would be difficult to integrate into our employees minds (with things like circular pitch, not module).

Thanks in advance.
 
Status
Not open for further replies.

Part and Inventory Search

Sponsor