Tek-Tips is the largest IT community on the Internet today!
Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!
-
Congratulations JAE on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!
Finding Center of Gravity 1
- Thread starter drewboy23
- Start date
-
1
- #2
I'm using NX, but the method should be the same (assuming menu items have not moved).
Analysis -> Mass using solids... then pick the solid bodies that make up your assembly (you can pick up to 1000 at once). The resulting listing will show you the center of gravity and other information.
Make sure the bodies have the correct densities assigned to them.
Analysis -> Mass using solids... then pick the solid bodies that make up your assembly (you can pick up to 1000 at once). The resulting listing will show you the center of gravity and other information.
Make sure the bodies have the correct densities assigned to them.
- Status