Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

Register Log in
  • Congratulations cowski on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

field electrical resistivity testing

Status
Not open for further replies.
abih

abih

Geotechnical
Joined
Nov 14, 2012
Messages
20
According to ASTM G57, we can run an alignment at specified spacings. I know some folks also run an additional alignment across the center of the original alignment at an 90 angle. Is this a routine practice or for calibration purpose?
 
Status
Not open for further replies.

Similar threads

ONENGINEER
  • Locked
  • Question Question
Frequency of laboratory Testing along Boreholes
Replies
8
Views
2K
EireChch
EireChch
Geotech_Pavement
  • Locked
  • Question Question
Construction Field Inspection Data Reporting Software
Replies
0
Views
416
Geotech_Pavement
Geotech_Pavement
harrohb
  • Locked
  • Question Question
Is my understanding of CU testing correct?
Replies
4
Views
2K
EireChch
EireChch
pelelo
  • Locked
  • Question Question
Lugeon and Lefranc field permeability tests
Replies
0
Views
426
pelelo
pelelo
GeoGeoGeo
  • Locked
  • Question Question
Cyclic triaxial testing on rock
Replies
0
Views
265
GeoGeoGeo
GeoGeoGeo

Part and Inventory Search

Sponsor

Back
Top