Continue to Site

Eng-Tips is the largest engineering community on the Internet

Intelligent Work Forums for Engineering Professionals

Register Log in
  • Congratulations waross on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

field electrical resistivity testing

Status
Not open for further replies.
abih

abih

Geotechnical
Nov 14, 2012
20
According to ASTM G57, we can run an alignment at specified spacings. I know some folks also run an additional alignment across the center of the original alignment at an 90 angle. Is this a routine practice or for calibration purpose?
 
Status
Not open for further replies.

Similar threads

ONENGINEER
  • Locked
  • Question
Frequency of laboratory Testing along Boreholes
Replies
8
Views
1K
EireChch
EireChch
Geotech_Pavement
  • Locked
  • Question
Construction Field Inspection Data Reporting Software
Replies
0
Views
325
Geotech_Pavement
Geotech_Pavement
harrohb
  • Locked
  • Question
Is my understanding of CU testing correct? 1
Replies
4
Views
2K
EireChch
EireChch
pelelo
  • Locked
  • Question
Lugeon and Lefranc field permeability tests
Replies
0
Views
332
pelelo
pelelo
GeoGeoGeo
  • Locked
  • Question
Cyclic triaxial testing on rock
Replies
0
Views
215
GeoGeoGeo
GeoGeoGeo

Part and Inventory Search

Sponsor

Back
Top Bottom