Tek-Tips is the largest IT community on the Internet today!
Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!
-
Congratulations TugboatEng on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!
Feel
- Thread starter rfulky
- Start date
GregLocock
Automotive
At the lower end, 0 Hz.
At the upper end it is a bit more difficult to tell. Dose charts for vibration typically stop at 800 Hz, but they are attempting to measure damage, not sensation.
I can definitely feel 300 Hz, on an engine. Cheers
Greg Locock
At the upper end it is a bit more difficult to tell. Dose charts for vibration typically stop at 800 Hz, but they are attempting to measure damage, not sensation.
I can definitely feel 300 Hz, on an engine. Cheers
Greg Locock
- Status