Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

Register Log in
  • Congratulations TugboatEng on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

FEA of HOTBOX(Skirt Shell Junction using ANSYS Workbench.

Status
Not open for further replies.
Mohit_singh

Mohit_singh

Mechanical
Joined
May 24, 2019
Messages
24
Location
IN
HI all
I am right now doing an thermal Structural FEA of Hotbox(Skirt Shell Junction)in Ansys Workbench. Now I did the thermal Analysis and Imported the thermal profile into Structural. In structural I have to apply Symmetric loading for pressure and Weight but Asymmetric Loading for Seismic Loads using Plane 25 (ISYM=1) elements. I don't know how to approach this problem in Workbench. Please Help
 
Status
Not open for further replies.

Similar threads

G
  • Question Question
FEA Simulation of a Piezoelectric Accelerometer with Frequency Response Analysis
Replies
2
Views
9K
gnana_235
G
M
  • Question Question
FEA Adhesive Modeling
Replies
3
Views
5K
milio000
M
D
  • Locked
Random vibration in ANSYS APDL using results from Linear Perturbation
Replies
1
Views
3K
hacksaw
hacksaw
Gardenfence
  • Locked
  • Question Question
Equivalent beam model of a thin cylindrical shell
Replies
8
Views
4K
GVDR
G
AhmedEltaweel
  • Question Question
stresses in girder using CSI bridge
Replies
0
Views
5K
AhmedEltaweel
AhmedEltaweel

Part and Inventory Search

Sponsor

Back
Top