I have a problem with a RJ2 robot controller. The teach pendant is continually freezing however is ok if the robot power is cycled. The only fault indication i have is via the LED indication on the CPU. This points to bad parity on the RAM. I am reluctant to change the CPU though due to not having a very recent back-up. Can anyone offer any advice
Tek-Tips is the largest IT community on the Internet today!
Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!
-
Congratulations cowski on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!
Fanuc CPU problems 1
- Thread starter meds
- Start date
- Status
Similar threads
- Locked
- Question