Jan 8, 2014 #1 hsinid Aerospace Joined Nov 9, 2013 Messages 7 Location MY Dear Engineers, Can i know what kind of failure mode that can happen on the wing spars, wing stringers, wing ribs and wing skins of an aircraft and it would be helpful if i can know the loads that cause that particular failure(s)
Dear Engineers, Can i know what kind of failure mode that can happen on the wing spars, wing stringers, wing ribs and wing skins of an aircraft and it would be helpful if i can know the loads that cause that particular failure(s)
Jan 8, 2014 #2 MikeHalloran Mechanical Joined Aug 29, 2003 Messages 14,450 Location US Yes, you can know all of that. All you have to do is reverse-engineer an aircraft. I suggest you pick a really old model. Mike Halloran Pembroke Pines, FL, USA Upvote 0 Downvote
Yes, you can know all of that. All you have to do is reverse-engineer an aircraft. I suggest you pick a really old model. Mike Halloran Pembroke Pines, FL, USA
Jan 8, 2014 #3 rb1957 Aerospace Joined Apr 15, 2005 Messages 16,133 Location CA read an airplane design book ... Raymer, Toreenbeek. if you're particularly intereted in structures, read Bruhn. Quando Omni Flunkus Moritati Upvote 0 Downvote
read an airplane design book ... Raymer, Toreenbeek. if you're particularly intereted in structures, read Bruhn. Quando Omni Flunkus Moritati
Jan 8, 2014 #4 IRstuff Aerospace Joined Jun 3, 2002 Messages 44,895 Location US Is this for school? TTFN faq731-376 Need help writing a question or understanding a reply? forum1529 Upvote 0 Downvote
Jan 31, 2014 #5 drawoh Mechanical Joined Oct 1, 2002 Messages 8,969 Location CA hsinid, I am under the impression that bad things happen when you smash into stuff. -- JHG Upvote 0 Downvote