Continue to Site

Eng-Tips is the largest engineering community on the Internet

Intelligent Work Forums for Engineering Professionals

  • Congratulations cowski on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

Failure Mode

Status
Not open for further replies.

hsinid

Aerospace
Nov 9, 2013
7
Dear Engineers,

Can i know what kind of failure mode that can happen on the wing spars, wing stringers, wing ribs and wing skins of an aircraft and it would be helpful if i can know the loads that cause that particular failure(s)

 
Replies continue below

Recommended for you

Yes, you can know all of that.
All you have to do is reverse-engineer an aircraft.
I suggest you pick a really old model.


Mike Halloran
Pembroke Pines, FL, USA
 
read an airplane design book ... Raymer, Toreenbeek.

if you're particularly intereted in structures, read Bruhn.

Quando Omni Flunkus Moritati
 
Is this for school?

TTFN
faq731-376
7ofakss

Need help writing a question or understanding a reply? forum1529
 
hsinid,

I am under the impression that bad things happen when you smash into stuff.

--
JHG
 
Status
Not open for further replies.

Part and Inventory Search

Sponsor