cgunn
Mechanical
- Nov 20, 2002
- 8
At present I am dealing with a 2, 25 year old Pine benders, for light and heavy duty applicaton. The machines are required to bend aluminum extrusions with varied thicknesses and surface angles. They are also used on material as thick as 1/2"*6" cold and hot rolled steel. The problem I am face with is replacing at least one of the benders with a suitable machine. At present we are encountering problems with twisting. Some previous research has been done on this topic and an Irle B 75 HH-SE was recommended to solve all problems and deliver what we need. I have been told that Irle is currently out of business... Any sugestions?
