Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

Register Log in
  • Congratulations LittleInch on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

Extract from the database the values of USERMAT state variables

Status
Not open for further replies.
paterriault

paterriault

Mechanical
Joined
Feb 16, 2007
Messages
2
Location
CA
I am using a custom constitutive relation through the USERMAT architecture. I created my USERMAT with the TB,USER command and I also needed to create a series of state variables that are constantly updated by ANSYS. At a specific moment of the simulation and at a precise location, I need to know the value of a state variable. Similarly to a previous thread (thread569-177259), it would also be nice to do a contour-plot of the state variable. Does anyone knows how to extract from the database the value of a state variable with an APDL command ?
Thanks in advance
 
Status
Not open for further replies.

Similar threads

nashki
  • Locked
  • Question Question
UDL on the Curve of Elbow
Replies
0
Views
3K
nashki
nashki
X
  • Locked
  • Question Question
ANSYS mechanical : How to read the dimensions which are defined as function of other dimensions in UGNX as parameters in ANSYS?
Replies
0
Views
1K
xinyu3liu
X
Sarikahirpara
  • Locked
  • Question Question
Negative Temperature values due to friction between gears.
Replies
0
Views
497
Sarikahirpara
Sarikahirpara
md_salem
  • Locked
  • Question Question
how to extract mode shapes vectors from ANSYS WORKBENCH file ?
Replies
0
Views
525
md_salem
md_salem
andradesilva
  • Locked
  • Question Question
how to print on the screen or export the axial inertia moment of a model, in ANSYS Mechanical APDL
Replies
1
Views
597
gnc89
gnc89

Part and Inventory Search

Sponsor

Back
Top