Eng-Tips is the largest forum for Engineering Professionals on the Internet.
Members share and learn making Eng-Tips Forums the best source of engineering information on the Internet!
-
Congratulations dmapguru on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!
Export deflected model in Ansys
- Thread starter Figgle
- Start date
Hi,
I don't think ANSYS generates a deflected solid model, just a deflected mesh. You can export your deflected mesh and attempt to generate a solid model using the ANSYS FE Modeller tool. See the following link for more info:
I believe there are also APDL scripts hosted on the xansys archives for generating stl geometries from deflected meshes.
Good luck,
Dave
I don't think ANSYS generates a deflected solid model, just a deflected mesh. You can export your deflected mesh and attempt to generate a solid model using the ANSYS FE Modeller tool. See the following link for more info:
I believe there are also APDL scripts hosted on the xansys archives for generating stl geometries from deflected meshes.
Good luck,
Dave
- Status
Similar threads
- Question
- Locked
- Question