hollerg
Chemical
- Mar 22, 1999
- 97
Because of a start-up I am having to do things that beyond my skill set. I have no prior experience with Experion, but need to capture fast data rather than the standard historian data. The data points were already in groups. I went to the historian and took out the entries in the standard form and placed them in the fast form. However the data is no longer being displayed by the group trend. I tried to find what document in the Experion documentation would cover this, but I was not able to uncover where to look. A document name or document number or a cheat sheet, would be very useful.
Do I need to delete the group and rebuild? I tried just deleting the individual entries and re-entering them, but that did not work. If so, could I have prevented the issue by building the entry in the same data line on the fast historian form (e.g. delete the standard historian entry on entry 1767 and go to the fast historian and enter the entry in 1767?
Do I need to delete the group and rebuild? I tried just deleting the individual entries and re-entering them, but that did not work. If so, could I have prevented the issue by building the entry in the same data line on the fast historian form (e.g. delete the standard historian entry on entry 1767 and go to the fast historian and enter the entry in 1767?
