Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

Register Log in
  • Congratulations LittleInch on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

Estimate solution time - CFX accessed via workbench v13

Status
Not open for further replies.
GeorgeEllwood

GeorgeEllwood

Mechanical
Joined
Aug 22, 2006
Messages
134
Location
GB
Hello,
I was wondering if anyone can tell is there a way to estimate how long a CFX job will take to run before it starts solving? I would like to be able to schedule jobs overnight whilst other people are not using the licenses, but I'd like to check that the job will have completed overnight.
Thanks
George
 
Status
Not open for further replies.

Similar threads

struclearner
  • Question Question
Modelling Tapped Bolted Joint by Line Body in ANSYS Workbench
Replies
0
Views
3K
struclearner
struclearner
T
  • Question Question
Accessing Named Selections of Contact Surfaces via CMSEL After Applying Condensed Geometry Not Possible
Replies
0
Views
5K
TOM1345
T
struclearner
  • Locked
  • Question Question
Reaction Force Distribution in ANSYS Workbench!
Replies
0
Views
1K
struclearner
struclearner
H
  • Locked
  • Question Question
how to apply triangular load on an area, in ANSYS Workbench static module
Replies
1
Views
3K
karachun
karachun
LS_SMS
  • Locked
  • Question Question
Joint Reactions in Solution Combination
Replies
4
Views
1K
STpipe
STpipe

Part and Inventory Search

Sponsor

Back
Top