Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

Register Log in
  • Congratulations MintJulep on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

Establishing a Link between imported DXF File and an IGS File

Status
Not open for further replies.
jay24

jay24

Mechanical
Joined
Mar 30, 2003
Messages
18
Location
IN
Hi,

I have imported a DXF File and an IGS file into CATIA V5. The exporting CAD Software was I-deas 10. How can I establish the link between these two imported files in CATIA V5?

Note: The DXF File and the IGS File are with respect to the same component.

Thanx in advance
Jayant
 
Status
Not open for further replies.

Similar threads

C
dxf/dwg export parameters
Replies
3
Views
1K
MrCATIA
M
wchasemason
  • Locked
  • Question Question
Automating the exporting of mesh data from an Analysis file using VBA
Replies
1
Views
551
Little Cthulhu
Little Cthulhu
Med Che
  • Question Question
How to get the link of a 2D Component Instance from a Drawing Catalog in CATIA VBA?
Replies
3
Views
5K
Little Cthulhu
Little Cthulhu
A
  • Locked
  • Question Question
Frame/Titleblock Macro - call image file in same parent folder
Replies
6
Views
2K
Little Cthulhu
Little Cthulhu
A
  • Locked
  • Question Question
CATIA Macro to insert product/part without link
Replies
2
Views
3K
AbhishekChavan
A

Part and Inventory Search

Sponsor

Back
Top