Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

Register Log in
  • Congratulations cowski on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

Error in verifying mesh

Status
Not open for further replies.
meolo2002

meolo2002

Marine/Ocean
Joined
Sep 24, 2009
Messages
37
Location
IT
Hi to everybody
I'm checking the skewness jacobian etc. in my mesh but patran shows an error message:
At this time, the test for EDGE ANGLE,FACE SKEW, JACOBIAN RATIO.. (etc) are not avaible for the MSC.Nastran preferece.
As I said i'm a beginner with this program..
What's the problem?
 
Status
Not open for further replies.

Similar threads

Gabriel93
  • Locked
  • Question Question
Error 4521 (elements perpendicular to their coordinate system x-axis)
Replies
0
Views
855
Gabriel93
Gabriel93
Giang123
  • Locked
  • Question Question
ASET1 card in NASTRAN
Replies
2
Views
2K
Giang123
Giang123
MihaelaN
  • Locked
  • Question Question
Threaded connections modelling with frictional contact in Patran/ Nastran
Replies
0
Views
2K
MihaelaN
MihaelaN
Johanlangman
  • Locked
  • Question Question
Error generating *.fo6 files; analysis failure
Replies
2
Views
730
dmapguru
dmapguru
Elineh
  • Locked
  • Question Question
error while meshing: non triparametric solid
Replies
1
Views
567
cohoman
cohoman

Part and Inventory Search

Sponsor

Back
Top