khalidkhattak
Mechanical
Can we use ER309MoL filler wire for welding SS316 and Duplex steel?
Tek-Tips is the largest IT community on the Internet today!
Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!
-
Congratulations LittleInch on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!
ER309MoL for Duplex-SS316 joint
- Thread starter khalidkhattak
- Start date
- Status
EdStainless
Materials
It should weld fine, have good strength and toughness.
The corrosion resistance of the weld will be less than for either of the base materials.
= = = = = = = = = = = = = = = = = = = =
Corrosion never sleeps, but it can be managed.
The corrosion resistance of the weld will be less than for either of the base materials.
= = = = = = = = = = = = = = = = = = = =
Corrosion never sleeps, but it can be managed.
- Status
Similar threads
- Question