Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

Register Log in
  • Congratulations LittleInch on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

equation of state for 60% treglycol

Status
Not open for further replies.
ablastexpert

ablastexpert

Civil/Environmental
Joined
Apr 14, 2005
Messages
2
Location
US
i am a ls-dyna user. i am modeling a tank filled with 60% treglycol and using linear polynomial equation of state for the fluid. does anyone know what is the coefficients for this fluid or is there a reference for that?
 
Status
Not open for further replies.

Similar threads

WayneKagawa
  • Locked
  • Question Question
Best strategy for verification of tangent for hyperelastic material
Replies
0
Views
698
WayneKagawa
WayneKagawa
mrmyagi
  • Locked
  • Question Question
EN 13445-3 C.7.5 Limitation of primary stresses in case of tri-axial state of stress
Replies
1
Views
335
TGS4
TGS4
joesm519
  • Locked
  • Question Question
Equivalent of "Measures" of Creo Simulate in Autodesk Nastran
Replies
0
Views
802
joesm519
joesm519
zidane.imade
  • Locked
UMAT subroutine for SMA
Replies
3
Views
4K
IceBreakerSours
IceBreakerSours
M
  • Question Question
FEA Frame Analysis (bolted and welded connections) of a skid.
Replies
0
Views
1K
mariyan.vt
M

Part and Inventory Search

Sponsor

Back
Top