Tek-Tips is the largest IT community on the Internet today!
Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!
-
Congratulations MintJulep on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!
EPOXY VS QUICKCRETE HIGH STRENGTH GROUT
- Thread starter break80
- Start date
JedClampett
Structural
Epoxy is the most common adhesive to anchor reinforcing. Non shrink grout is not used much anymore and most testing is based on epoxy type materials.
However, if you have a certain strength you need to develop and it's a code application, you'll need an epoxy tested per ACI 308 and the embedment, edge distance and spacing designed to ACI 318, Appendix D. Not any old epoxy will have the necessary pedigree.
However, if you have a certain strength you need to develop and it's a code application, you'll need an epoxy tested per ACI 308 and the embedment, edge distance and spacing designed to ACI 318, Appendix D. Not any old epoxy will have the necessary pedigree.
- Status
Similar threads
- Question
- Locked
- Solved
- Locked
- Question
- Question