Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

Register Log in
  • Congratulations TugboatEng on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

epoxy tensile forces

Status
Not open for further replies.
cris300

cris300

Structural
Joined
Jun 28, 2012
Messages
20
Location
DO
i have a epoxy with the following specifications


tensile strength = 3135 psi
bond strength = 7370 psi


how i must calculate the maximun tensile force for a bar with a diameter 1 1/4
that will be embebed to the concrete

cris
 
Sort by date Sort by votes
cris300...the values you want are usually specific to the manufacturer of the epoxy....Hilti will be different than Simpson and Powers. Check the load tables provided by the manufacturer of the epoxy.
 
Upvote 0 Downvote
Status
Not open for further replies.

Similar threads

Sparky4598
  • Locked
  • Question Question
Rebar doweling epoxy
Replies
4
Views
2K
ANE91
ANE91
atakulaksizoglu
  • Locked
  • Question Question
Why are seismic forces not taken into account in P/T design?
Replies
1
Views
244
rapt
rapt
nathan7
  • Locked
  • Question Question
Tensile bond between in-situ topping and hollow core plank
Replies
1
Views
221
hokie66
hokie66
Riversidean
  • Locked
  • Question Question
Dowel Bar Oil / Epoxy / Plastic Sleeves
Replies
13
Views
2K
bb29510
bb29510
CTDOT
  • Locked
  • Question Question
Tracking Prices for Epoxy Coated Rebar
Replies
0
Views
199
CTDOT
CTDOT

Part and Inventory Search

Sponsor

Back
Top