Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

Register Log in
  • Congratulations MintJulep on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

Epoxy Grout Injection in Crack over 1/4" wide 1

Status
Not open for further replies.
structeng24

structeng24

Structural
Joined
Sep 27, 2010
Messages
25
Location
US
Hello,
Has anyone had experience with epoxy grout injection in cracks over 1/4" wide. There is a crack through stone masonry up to 1" wide and I'm trying to see if epoxy grout injection should be used. Most of the products I see are for up to 1/4" wide.
Thanks
 
Sort by date Sort by votes
Cracks exceeding 1/4" in width should be thoroughly cleaned and grouted. Epoxy is too expensive to fill 1" wide cracks.

BA
 
Upvote 0 Downvote
Status
Not open for further replies.

Similar threads

bnickeson
  • Question Question
Deep epoxy embedment in foundation wall
2
Replies
21
Views
2K
bnickeson
bnickeson
CJLCivilStruct
  • Question Question
Calculation of crack widths in foundation design
2
Replies
21
Views
21K
CJLCivilStruct
CJLCivilStruct
PAK_ENG
  • Locked
  • Question Question
Crack modeling in CANDE
Replies
1
Views
1K
IDS
IDS
Veer007
  • Locked
  • Question Question
Inquiry: Use of 3/4" Ø Bolt for 4" Wide Beam
Replies
11
Views
1K
dik
dik
BacBac
  • Locked
  • Solved
Cast-In Starter Bars vs Post Fixed Epoxy - Edge Breakout
Replies
9
Views
5K
ANE91
ANE91

Part and Inventory Search

Sponsor

Back
Top