Has anyone ever used the EPANET program? I have been contacted to look at a distribution system and I am trying to learn this program. I was thinking about buying the Hastead WaterCad program but wanted to know pros and cons for both of them. Any recommendations for other programs? That would also be appreciated. Thanks
Tek-Tips is the largest IT community on the Internet today!
Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!
-
Congratulations LittleInch on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!
EPANET program
- Thread starter runoff
- Start date
Search this forum before asking the question.
Haestad program uses the same engine as Epanet but just has a different front end.
Epanet is just as good and miles cheaper.
If you want to invest in a steady program look at Fathom or Fluid Flow. they are easier to use than both of those you mentioned.
Geoffrey D Stone FIMechE C.Eng;FIEAust CP Eng
Haestad program uses the same engine as Epanet but just has a different front end.
Epanet is just as good and miles cheaper.
If you want to invest in a steady program look at Fathom or Fluid Flow. they are easier to use than both of those you mentioned.
Geoffrey D Stone FIMechE C.Eng;FIEAust CP Eng
- Thread starter
- #3
Runoff
Its just advice to use the search facility of this Forum before lazily asking a question that has been addressed many many times. Nothing heavy handed at all.
Geoffrey D Stone FIMechE C.Eng;FIEAust CP Eng
Its just advice to use the search facility of this Forum before lazily asking a question that has been addressed many many times. Nothing heavy handed at all.
Geoffrey D Stone FIMechE C.Eng;FIEAust CP Eng
- Status
Similar threads
- Locked
- Question
