Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

Register Log in
  • Congratulations MintJulep on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

Enhanced Scenes and VB

Status
Not open for further replies.
forfun

forfun

Automotive
Joined
Apr 26, 2003
Messages
57
Location
US
Does anybody know how to create and modify "Enhanced Scenes" with VB in R14. We were able to do this with the old style scenes but can't seem to figure it out for enhanced scenes.

Thanks in advance
forfun
 
Status
Not open for further replies.

Similar threads

N
  • Question Question
Part mass and CG
Replies
4
Views
5K
nicsachal
N
Bheem369
  • Locked
  • Question Question
VB Script for CLOSED VOLUME.
Replies
0
Views
226
Bheem369
Bheem369
JSVKAN
  • Locked
  • Question Question
Open Drawing sheet and Renumbering
Replies
1
Views
2K
LWolf
LWolf
Ivan_Designs_Da
  • Locked
  • Question Question
Adding Parts to Fully Overloaded Enhanced Scenes
Replies
0
Views
244
Ivan_Designs_Da
Ivan_Designs_Da
A
Cutting and bending
Replies
1
Views
1K
MrCATIA
M

Part and Inventory Search

Sponsor

Back
Top