Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

Register Log in
  • Congratulations JAE on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

Encapsulating Transformers

Status
Not open for further replies.
Maxham1

Maxham1

Mechanical
Joined
Dec 22, 1999
Messages
50
Location
US
We looking to encapsulate our transformers with windings around their E shaped cores. Is there a source that can help us a vacuum chamber that we can use when encapsulating the transformers? Each transformer is about 8 in X 8 in X 6 in in size. Basically when we're done with the encasulant process, we'll have brick slight larger than the initial dimensions shown above. We think we need a vacuum chamber so that we can remove all the air in the nooks and crannies formed by the winding/core assembly.

Thanks,

Dave
 
Status
Not open for further replies.

Part and Inventory Search

Sponsor

Back
Top