Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

Register Log in
  • Congratulations TugboatEng on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

Emulsion Maufacturing for Heat Sensitve Compounds

Status
Not open for further replies.
emulsions123

emulsions123

Industrial
Joined
Apr 11, 2012
Messages
1
Location
NZ
I have formulated an oil in water emulsion by the fusion method. But now I want to add a heat sensitive compound to the internal oil phase. Can anyone recommend a method for incorporation of the compound in the internal oil phase, without changing my formulation ? Cold processing of the excipients does not actually work

Thank you
 
Status
Not open for further replies.

Similar threads

yamoffathoo
  • Locked
  • Question Question
Does aeration of a vinyl acetate based emulsion containing carbon fibers reduce LDV?
Replies
3
Views
1K
yamoffathoo
yamoffathoo
BSMEclassof2012
  • Question Question
Premature Deterioration of Ozone Diffuser Gaskets – Request for Support
Replies
3
Views
4K
btrueblood
btrueblood
AnisaMaski
  • Locked
  • Question Question
Specified Minimum Yield Stress for Flexible Pipe.
Replies
2
Views
1K
AnisaMaski
AnisaMaski
Mahmoud_abu
  • Locked
  • Question Question
Advise for my career
Replies
1
Views
1K
IRstuff
IRstuff
1946ladjal
  • Locked
  • Question Question
Trim Bed for adsorption of heavy aromatics
Replies
2
Views
2K
1946ladjal
1946ladjal

Part and Inventory Search

Sponsor

Back
Top