bighappy11
Civil/Environmental
Does anyone have any good techniques on retrieving Xrefs from a DWG that is going to be emailed??
Tek-Tips is the largest IT community on the Internet today!
Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!
-
Congratulations JStephen on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!
Emailing DWGs with Xrefs GALORE!!!!!
- Thread starter bighappy11
- Start date
- Status
Open drawing.
File/eTransmit
Chris
Systems Analyst, I.S.
SolidWorks 06 4.1/PDMWorks 06
AutoCAD 06
ctopher's home (updated 06-21-06)
File/eTransmit
Chris
Systems Analyst, I.S.
SolidWorks 06 4.1/PDMWorks 06
AutoCAD 06
ctopher's home (updated 06-21-06)
- Thread starter
- #3
bighappy11
Civil/Environmental
Nice! and it ZIPPED IT!
sweet. thanks.
sweet. thanks.
![[cheers]](/data/assets/smilies/cheers.gif "[cheers] [cheers]")
Chris
Systems Analyst, I.S.
SolidWorks 06 4.1/PDMWorks 06
AutoCAD 06
ctopher's home (updated 06-21-06)
It's best to use relative paths when doing this. If you use absolute paths then the recipient is required to have those exact paths on their computer. Even with relative paths, the recipient may not like that a bunch of folders get created on his/her computer. If you can use the same folder as the drawing and use relative paths, it will be easiest for the recipient. My opinion only......
- Status