Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

  • Congratulations TugboatEng on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

electrical biased maintenance engineer

Status
Not open for further replies.

engeeneer

Specifier/Regulator
Joined
Sep 1, 2013
Messages
23
Location
GR
hello
I often read in ads the term 'electrical biased maintenance engineer'
what does 'electrical biased' exactly mean?
and how does a maintenance engineer become 'electrical biased'?
thanks!
 
As opposed to a mechanically-biased maintenance engineer. Someone who understands schematic diagrams, can troubleshoot power and/or PLC/SCADA type systems, etc.

Dan - Owner
Footwell%20Animation%20Tiny.gif
 
I've always been the mechanically biased maintenance Engineer who wanted to work on electrical stuff with a 6-inch hammer wrench. The electrical guys with their teeny-tiny screw drivers and one-handed side cutters always made me smile.

David Simpson, PE
MuleShoe Engineering

"Belief" is the acceptance of an hypotheses in the absence of data.
"Prejudice" is having an opinion not supported by the preponderance of the data.
"Knowledge" is only found through the accumulation and analysis of data.
The plural of anecdote is not "data"
 
Status
Not open for further replies.

Part and Inventory Search

Sponsor

Back
Top