Jul 20, 2012 #1 jfoxx Mechanical Joined Jul 2, 2012 Messages 9 Location US I changed the appearance, but it is still transparent. Any troubleshooting tips?
Jul 23, 2012 #2 CorBlimeyLimey Mechanical Joined Nov 5, 2003 Messages 15,292 Location CA Check whether the material have you chosen is transparent. Expand the Display Pane (double chevron at top RH corner of FM) and check transparency setting there. Also right click in the Display Pane and select the Remove all part appearances option. Upvote 0 Downvote
Check whether the material have you chosen is transparent. Expand the Display Pane (double chevron at top RH corner of FM) and check transparency setting there. Also right click in the Display Pane and select the Remove all part appearances option.