Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

Register Log in
  • Congratulations LittleInch on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

Elastoplastic Constitutive Model in MSC.Nastran

Status
Not open for further replies.
feajob

feajob

Aerospace
Joined
Aug 19, 2003
Messages
161
Location
CA
Hi,

I would like to use an elastoplastic constitutive model with nonlinear data input for stress/strain curve in MSC.Patran pre-processor. Please let me know how can I introduce this curve? If you have any example for this purpose, please share it with me.

Regards,
AAY
 
Status
Not open for further replies.

Similar threads

netsonicyxf
  • Question Question
Add supports in the Lusas model
Replies
1
Views
3K
rb1957
rb1957
YuJie_PV
  • Question Question
1/2 loading for 1/2 model in ansys?
Replies
9
Views
10K
YuJie_PV
YuJie_PV
GregLocock
  • Locked
  • Question Question
Z88 Aurora - model problem
Replies
3
Views
4K
GregLocock
GregLocock
Kamyar_K
  • Locked
  • Question Question
Slip in the rigid railroad track - ABAQUS model
Replies
3
Views
899
Kamyar_K
Kamyar_K
Y
  • Locked
  • Question Question
Rutman Fastener Modelling in Patran
Replies
2
Views
3K
Alex Szatmary
Alex Szatmary

Part and Inventory Search

Sponsor

Back
Top