Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

  • Congratulations TugboatEng on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

Earthing test of distribution system.

Status
Not open for further replies.

SauravWest

Electrical
Joined
Dec 4, 2019
Messages
35
Location
NP
Dear Sirs,

1. How to check the earthing resistance values for 33 kV, 11 kV and LT lines distribution poles?

Regards,
 
In a 11 KV O/H distribution line about 1.7 KM (only) and each individual poles are earthed with Earth spikes ( Earth resistance of each location is less than 5 Ohm).

But Inspector is insisting us to provide continious earthing for the said O/H line as per IE rules. I could not traced the same from IE rule book.

Regards,
 
Status
Not open for further replies.

Part and Inventory Search

Sponsor

Back
Top