Continue to Site

Eng-Tips is the largest engineering community on the Internet

Intelligent Work Forums for Engineering Professionals

Register Log in
  • Congratulations cowski on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

Ear Type Lifting Lug Calculation - Allowable stress criteria

Status
Not open for further replies.
Fizza453

Fizza453

Mechanical
Jun 22, 2011
262
We have selected ASME B30.20 for the allowable stresses.

As per Clause 20-1.2.2 of B30.20, max. allowable stresses (tensile) must not exceed 1/3 of Sy.

How compress computes other max. allowable stresses such as, Shear, Bending, Bearing ? Also provide us the reference of the Allowable stress criteria used by compress for the said stresses.

We are using Compress: Build 7300.

Nasir
Welding Engineer
DESCON ENGINEERING LIMITED
PAKISTAN
 
Status
Not open for further replies.

Similar threads

Amr Shams
  • Question
Advisory Warning on CS-2 Vacuum Chart Temperature Limit- Allowable compressive stress
Replies
0
Views
2K
Amr Shams
Amr Shams
TheEverest
  • Locked
  • Question
Weld Gap between Ear Lug and Top Head-Shell Circumferential Weld Line ?
Replies
0
Views
668
TheEverest
TheEverest
Champ58
  • Locked
  • Question
WRC-537 Calculation
Replies
0
Views
732
Champ58
Champ58
Amr Shams
  • Locked
  • Question
Check saddle plate stresses
Replies
0
Views
605
Amr Shams
Amr Shams
ColinPearson
  • Locked
  • Question
Lifting Lug with Shell Corrosion (Codeware COMPRESS)
Replies
13
Views
634
marty007
marty007

Part and Inventory Search

Sponsor

Back
Top Bottom