Tek-Tips is the largest IT community on the Internet today!
Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!
-
Congratulations cowski on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!
DXF to NX Conversion
- Thread starter jlesko1
- Start date
JohnRBaker
Mechanical
How is it that you were 'borrowing' a license? Are we taking about 'borrowing' a license as in attaching a laptop to your NX license server and 'temporarily' transferring (AKA 'borrowin') a license from the server to the laptop so that NX can run standalone without having to be connected to the license server?
John R. Baker, P.E.
Product 'Evangelist'
Product Design Solutions
Siemens PLM Software Inc.
Industry Sector
Cypress, CA
To an Engineer, the glass is twice as big as it needs to be.
John R. Baker, P.E.
Product 'Evangelist'
Product Design Solutions
Siemens PLM Software Inc.
Industry Sector
Cypress, CA
To an Engineer, the glass is twice as big as it needs to be.
- Thread starter
- #3
Yes that is exactly what I was referring to. That's what it's called - borrowing - per NX. I borrowed all the modeling modules, but forgot the translators. In any event, I don't need the conversion anymore as I'm back to work from the weekend and am able to get the licenses I need here.
- Status
