DWGeditor

[hot rod]

hi first post and maybe the wrong place to put this thread as dwgeditor is part of solidworks
but has anybody used this?
and what do you think.
cheers

 

[support]

Here are some FAQs

You may have seen this already but here is a FAQ page on the DWGseries (including DWGeditor):

http://www.dwgseries.com/pages/faqs/index.html

We also have a few DWGeditor and DWGgateway tips here:

http://www.3dcadtips.com/go.php?topic=1&cat=2929

Good luck!

3DCADTips Support Desk