Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

Register Log in
  • Congratulations cowski on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

Duo Cone Seals

Status
Not open for further replies.
frans

frans

Mechanical
Joined
Sep 19, 2000
Messages
41
Location
NZ
I am looking for a large diameter floating mechanical seal eg the Duo Cone type from NAK. Size approx 965x1040x80 mm.

Looks like I may have to make my own. Any suggestions as to type of material to use for the interface surfaces?

Thanks, Bert
 
Status
Not open for further replies.

Similar threads

Ahmed Khan
  • Locked
  • Question Question
Vapor pressure margin for centrifugal pumps mechanical seals
Replies
0
Views
326
Ahmed Khan
Ahmed Khan
innominata
  • Locked
  • Question Question
Smallest O Ring Cross Section for Face Seals - Parker O Ring Handbook
Replies
7
Views
1K
Prometheus21
Prometheus21
Rha257
  • Locked
  • Question Question
Honeycomb and hole pattern seals
Replies
0
Views
214
Rha257
Rha257
Raj_2958
  • Locked
  • Question Question
Does presence of H2S> 50 ppm in Pumped fluid require use of Double Mechanical Seals
Replies
2
Views
453
Raj_2958
Raj_2958
shashankTurbomachine
  • Locked
  • Question Question
GAS SEALS
Replies
9
Views
590
russcalub
russcalub

Part and Inventory Search

Sponsor

Back
Top