Eng-Tips is the largest forum for Engineering Professionals on the Internet.

Members share and learn making Eng-Tips Forums the best source of engineering information on the Internet!

Register Log in
  • Congratulations JStephen on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

Ductile iron pipe locking gaskets 1

Status
Not open for further replies.
rjbroussard

rjbroussard

Industrial
Joined
Jul 19, 2007
Messages
2
Location
US
We have just completed an installation of 2000 ft of 24" Mcwane Dutile Iron Pipe. We used a resrtained or loking gasket maunufactured by Gripper Gasket Co. WE have already removed 8 rolled/leaked joints. This is not by far our first installation of 24" DIP. We have quite a few miles under our belt with no rolled rubbers.
Has anyone used or heard of any problems with this manufacturer. Any comments would be greatly appreciated.
 
Status
Not open for further replies.

Similar threads

A
  • Locked
  • Question Question
RC Pipe support - for 600 dia. ductile iron pipe
Replies
2
Views
3K
ambesan2019
A
C
  • Question Question
Pipe Settlement Using SETTLE 3D
Replies
0
Views
3K
CE2025
C
RFreund
  • Locked
  • Question Question
Temporary Reinforced Concrete Pipe Support
Replies
1
Views
1K
jhnblgr
jhnblgr
ukengineer58
  • Locked
  • Question Question
buried ductile iron pipe
Replies
2
Views
248
ukengineer58
ukengineer58
Gnoowii
  • Locked
  • Question Question
Torsional effect by Pipe on Beam or Girder
Replies
2
Views
477
1503-44
1503-44

Part and Inventory Search

Sponsor

Back
Top