Hey I have a question about designing a feedline for a dual band antenna. I have a 2.4, 5.8GHz antenna attached to a ground plane and was wondering how you guys would design a 50ohm feedline. I did it the way I was taught but am getting varied differences between simulation and tests. Wondering if it might be the feedline. Thanks.
Tek-Tips is the largest IT community on the Internet today!
Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!
-
Congratulations JAE on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!
Dual band microstrip feedline.
- Thread starter gkuma
- Start date
Similar threads
- Locked
- Question
- Locked
- Question