Continue to Site

Eng-Tips is the largest engineering community on the Internet

Intelligent Work Forums for Engineering Professionals

  • Congratulations cowski on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

drying a material with heat

Status
Not open for further replies.

jsievers

Materials
Sep 23, 2003
1
I was wondering if anyone knew of a device (possibly sold in stores) that could dry a paper material quickly without going over 100 degrees Farenheit.
 
Replies continue below

Recommended for you

If the material is a web that can be dried while winding for one roll to another you can blow warm air on it. Look-up web driers in Google. There are many manufacturers. If drying in bulk a vacuum drier would probably be most appropriate. Limiting temp to 100F will make drying much slower than at higher temps, but it can be done.
 
Status
Not open for further replies.

Part and Inventory Search

Sponsor