Tek-Tips is the largest IT community on the Internet today!
Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!
-
Congratulations JAE on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!
Drill 40mm thick Chrome Alloy Steel
- Thread starter 1Hector
- Start date
racookpe1978
Nuclear
I've also used Hougen drills for even deeper, larger bore holes.
Their holes won't make "reamer quality" finishes, but they are fast and adequate for a thermocouple hole. You'll need a way to clamp the mag-based drills to the pipe.
What diameter thermocouple?
Their holes won't make "reamer quality" finishes, but they are fast and adequate for a thermocouple hole. You'll need a way to clamp the mag-based drills to the pipe.
What diameter thermocouple?
- Status
Similar threads
- Question
- Locked
- Question
