Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

Register Log in
  • Congratulations TugboatEng on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

Draw grid lines in ANSYS Workbench

Status
Not open for further replies.
ru263

ru263

Civil/Environmental
Joined
Apr 10, 2012
Messages
2
Location
AU
Hi,
I want to model a ten story building in ANSYS Workbench. I think it may be easy to draw grid lines of column positions first. I found that grid lines can be drawn in workbench, but it is only for same spacing. Is there any method to draw grid lines with different spacings? Your help is greatly appreciated.
Thank you very much
 
Status
Not open for further replies.

Similar threads

struclearner
  • Locked
  • Question Question
Reaction Force Distribution in ANSYS Workbench!
Replies
0
Views
1K
struclearner
struclearner
H
  • Locked
  • Question Question
how to apply triangular load on an area, in ANSYS Workbench static module
Replies
1
Views
3K
karachun
karachun
O
  • Locked
  • Question Question
ansys civata
Replies
0
Views
2K
oktaeng1
O
X
  • Locked
  • Question Question
ANSYS mechanical : How to read the dimensions which are defined as function of other dimensions in UGNX as parameters in ANSYS?
Replies
0
Views
1K
xinyu3liu
X
S
  • Locked
Concrete Shrinkage modelling with ANSYS
Replies
1
Views
2K
crshears
crshears

Part and Inventory Search

Sponsor

Back
Top