Continue to Site

Eng-Tips is the largest engineering community on the Internet

Intelligent Work Forums for Engineering Professionals

  • Congratulations waross on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

Double Span with Unequal Lengths

Status
Not open for further replies.

SilenceJes

Civil/Environmental
May 10, 2007
3
I am trying to find the deflection and moment formulas for a distributed load on a double span, with unequal lengths. The distributed load is equal on both spans.
 
Replies continue below

Recommended for you

I haven't found this loading condition as a canned case by itself. You could use superposition with case 1 being a single span distributed load and case 2 a single span with a negative unit point load at point of distance a from the left end. Solve for the deflection at point "a" for each case, set the deflections equal to eachother and solve for the true value of the interior support load. Sum moments and vertical forces to arrive at the exterior support loads.

 
I didn't say that right,

Get the deflection equation of uniform load case and the deflection equation of the interior support case then,

Set point "a" final deflection = 0,

0 = Deflection Case 1 + Deflection Case 2

 
Status
Not open for further replies.

Part and Inventory Search

Sponsor