Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

  • Congratulations MintJulep on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

Dog leg pipe in Offshore riser

Status
Not open for further replies.

zacharialamsyah

Chemical
Joined
Nov 26, 2013
Messages
54
Location
ID
I have some problem to design dog leg pipe in offshore riser

- Can the dog leg pipe constructed like “L” shape or 90 degree bend , because the term dog leg pipe usually related to Z shapes or 45 Deg bend pipe, what international code or standard accommodate this design?

- What the protection (from drop object study) should be used to prevent dog leg pipe rupture (leak)
 
There should be no difference in design or protection for this pipe than any other pipe.

Your post has no details or explanation of what your "problem" is so the response is also vague and has no details.

Provide more details and a drawing/sketch and w might get somewhere....

My motto: Learn something new every day

Also: There's usually a good reason why everyone does it that way
 
Status
Not open for further replies.

Part and Inventory Search

Sponsor

Back
Top