Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

  • Congratulations cowski on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

Documentaing Changes in Hysys

Status
Not open for further replies.

Zpr

Petroleum
Joined
Jan 22, 2008
Messages
4
Location
NO
Hi

I am about to perform some major modifications to a simulation file in Hysys, which will require proper documentation to keep track of the changes.

Does know of a good way to keep track of these changes between different versions of the simulation file?

Regards
 
There is no automated way, as far as I know. I usually keep a list of changes in a spreadsheet. You could also export the simulation input to a text file via Simulation/Hysys XML, then compare the different versions.

Cheers,
Joerd

Please see FAQ731-376 for tips on how to make the best use of Eng-Tips.
 
As Joerd says: No automated way.

Save the file as rev "A" (or whatever) before stating the change.

Best regards

Morten
 
Status
Not open for further replies.

Part and Inventory Search

Sponsor

Back
Top