Tek-Tips is the largest IT community on the Internet today!
Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!
-
Congratulations LittleInch on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!
DISTRIBUTING COUPLING ELEMENTS 1
- Thread starter AG1980
- Start date
-
1
- #2
> is using the coupling constraint equivalent to rigid elements?
No, use an RB3D2 or one of it's friends depending upon what exactly you want to do. Explicit MPC's will do the same but you need to know what you are doing with them. Read the manual carefully and be careful how you define them - it's very easy to make mistakes.
gwolf
No, use an RB3D2 or one of it's friends depending upon what exactly you want to do. Explicit MPC's will do the same but you need to know what you are doing with them. Read the manual carefully and be careful how you define them - it's very easy to make mistakes.
gwolf
- Thread starter
- #3
- Status
Similar threads
- Locked
- Question
- Locked
- Question